System Requirement

- ThaiTelephone SIP account

- High speed internet connection or LAN

- Cisco ATA-186 and telephone

- Telephone line

How to config IP Phone

Configuring SIP Account through a Web Browser

How to make a call

Configuring Cisco ATA-186 through the IVR, perform the following steps

Configuring SIP Account through a Web Browser

Once you have IP connection from the ATA-186 to any PC, you can perform the remaining configurations through the web server.

If you want to check ip address, please pick up the handset of your phone and press the red button on Cisco ATA-186. And then press 80# on the phone. You will hear IP Address from IVR.

1. Open web browser and type http://ip address/dev like in the picture below. (If you want to config ip address for IP Phone click here.)


                     1.1

2. A set up page will be displayed, set as following the picture below.


                                                     2.1

Configure your screen guide :

1. StaticIP : type IP address in this box.(If you want to change IP)
2. StaticRoute : type static route value in this text box.(If you want to change static route)
3. StaticNetMask : type static net mask value.(If you want to change static netmask)
4. UID0 : Thaitelephone SIP Account
5. PWD0 : Thaitelephone Password
6. GkOrProxy : ipphone.kallkool.com
7. UseLoginID : 1
8. LoginID0 : Thaitelephone SIP Account (Thaitel Account like in UID0)
9. UseSIP : 1
10. SIPRegOn : 1
11. SIPPort : 5060
12. OutBoundProxy : ipphone.kallkool.com

To make sure that all of functions like in the same status as the picture, then click apply for saving configuration.

3. On new configured screen, press [Click here to reload] once to reload new configuration (see picture below).


                                                    3.1

Now you can exit the web browser and start making your call by following the section below.

[ back to top ]

How to make a call

To make free call between Thaitelephone Account

The simply way to make a call, type destination Thaitelephone SIP account number.

To make a call to normal phone or cell phone number

Pick up your handset and dial the destination number in this format
 
Country code + City Code + Telephone Number

More example

Calling to USA : country code + area code + phone Number

Type : 12131234567

Calling to England : 44 + Phone number

Type : 447880999999

Calling to Bangkok : country code + area code + phone number

(66) + 2 + 1234567 Type : 6621234567

Calling to Mobile phone : country code + area code + phone number

(66) + 81 + 1234567 Type : 66811234567


Special & simple to dial for Thailand destination :

You can dial telephone as this following : City Code + Telephone Number

Example :

Calling to Bangkok : (02) + telephone number (7 digits)

Type : 022222222

Calling to another provinces : Area code + Phone number

Type : 053444444 (Chiang Mai)

Calling to Mobile phone : (08X) + telephone number (7 digits)

Type : 0819999999


[ back to top ]

Configuring Cisco ATA-186 through the IVR, perform the following steps.

1. Connect an analog touch-tone phone to the port labeled "PHONE 1" at the back of the ATA186.
2. Pick up the handset from the phone, and press the clear function button on top of the ATA 186. You will hear the initial IVR prompt.

Note:  The IVR cannot be used or heard unless your phone is connected to the second port of the ATA labeled "PHONE 2".

3. You will be prompted to enter a menu number followed by the # key. Key in the menu number using the touch-tone pad. The following table lists the menu options that you will need, in order to configure basic IP connectivity to the ATA.

Note: If you set DHCP to 1 the ATA-186 will automatically detect the Static IP, Statice Route, StaticNetMask.

Note:  Press the * key to indicate a delimiter (dot). For example, 192*168*3*1 would be used to enter an IP address via the touchpad.

Note:  When entering values for a field that is in hexadecimal, you must convert it to a decimal value in order to enter it into the IVR system. For example to enter the hex value 0x6A, you would key in the number 106 in the IVR.

4. Press the # key after you have entered the value. If you do not press #, the system will automatically timeout after 10 seconds. You will hear a recording of the value you entered, followed by a request to press one of the following keys:

1— Change your entered value.
2— Review your entered value.
3— Save your entered value.
4— Review the current saved value.

5. After completing the configuration through the IVR, press the # key to exit.

Note: To confirm that you are using the correct IP address, press 80# on IVR.

[ back to top ]